• AVR Freaks

AnsweredHot!USB 2.0 Communication

Author
r0shan
New Member
  • Total Posts : 16
  • Reward points : 0
  • Joined: 2017/07/08 01:51:26
  • Location: 0
  • Status: offline
2020/03/30 22:55:06 (permalink)
0

USB 2.0 Communication

Hi All,
 
I wanted to create a USB webcam kind of device. For that I required USB 2.0 Hi-speed Communication(480Mbps) at least. As mug up with browsers and forums I found that I can choose PIC32MZ2048EFM100 Micro-controller and a pmp camera (OV7670).
I found libraries and examples for USB HID Low Speed and Full Speed. But I did not find any examples or libraries for Hi-speed Communication. If anyone have/know please share with me.
#1
JarekC
Starting Member
  • Total Posts : 33
  • Reward points : 0
  • Joined: 2016/10/20 07:06:52
  • Location: 0
  • Status: offline
Re: USB 2.0 Communication 2020/03/31 08:49:10 (permalink) ☼ Best Answerby r0shan 2020/03/31 22:09:26
#2
r0shan
New Member
  • Total Posts : 16
  • Reward points : 0
  • Joined: 2017/07/08 01:51:26
  • Location: 0
  • Status: offline
Re: USB 2.0 Communication 2020/03/31 22:10:07 (permalink)
0
Thanks JarekC. It's much needful and much similar to what I wanted.
#3
r0shan
New Member
  • Total Posts : 16
  • Reward points : 0
  • Joined: 2017/07/08 01:51:26
  • Location: 0
  • Status: offline
Re: USB 2.0 Communication 2021/02/24 00:48:09 (permalink)
5 (1)
Dear All,
I'm trying to do a webcam kind of device using PIC32MZ2048EFM064 and this is the example I'm trying to do. I found the circuit and code in this example but I'm facing one problem that I don't  know how to use this code in MPLAB X and make a hex from this. I searched everywhere but didn't find the solution So, finally came here. Please someone help me to figure out this problem and tell me how can I make it work, debug and generate hex from this code.
 
Thanks & Regards,
Roshan 
#4
TS9
Super Member
  • Total Posts : 936
  • Reward points : 0
  • Joined: 2010/05/07 10:52:22
  • Status: offline
Re: USB 2.0 Communication 2021/02/24 20:34:52 (permalink)
2.5 (2)
Hi,

Are you able to make simple code, create hex and toggle LED?

--
TS9
#5
r0shan
New Member
  • Total Posts : 16
  • Reward points : 0
  • Joined: 2017/07/08 01:51:26
  • Location: 0
  • Status: offline
Re: USB 2.0 Communication 2021/02/25 00:03:44 (permalink)
1 (1)
No
#6
ric
Super Member
  • Total Posts : 30244
  • Reward points : 0
  • Joined: 2003/11/07 12:41:26
  • Location: Australia, Melbourne
  • Status: offline
Re: USB 2.0 Communication 2021/02/25 00:19:36 (permalink)
5 (2)
You're not going to get far with a more complex exercise if you can't do the basics first.
 

I also post at: PicForum
Links to useful PIC information: http://picforum.ric323.co...opic.php?f=59&t=15
NEW USERS: Posting images, links and code - workaround for restrictions.
To get a useful answer, always state which PIC you are using!
#7
r0shan
New Member
  • Total Posts : 16
  • Reward points : 0
  • Joined: 2017/07/08 01:51:26
  • Location: 0
  • Status: offline
Re: USB 2.0 Communication 2021/02/25 00:50:33 (permalink)
4 (1)
Yeah for in this case. I'm more into hardware person. Normally I work with 8bit pic or arduino based controllers. There I used to do find the code from internet and directly dump into hardwares. Here in mplabx & xc32 compiler it's too complex.
 
I don't even know which I have to select while creating project

Attached Image(s)

#8
r0shan
New Member
  • Total Posts : 16
  • Reward points : 0
  • Joined: 2017/07/08 01:51:26
  • Location: 0
  • Status: offline
Re: USB 2.0 Communication 2021/02/25 22:12:19 (permalink)
0
Hi, I expect some study materials or references. So that I can solve above problems
 
#9
Jump to:
© 2021 APG vNext Commercial Version 4.5