• AVR Freaks

Hot!RN4870/71 How to get list of programmed commands

Author
baseball07
Starting Member
  • Total Posts : 37
  • Reward points : 0
  • Joined: 2010/09/17 17:19:23
  • Location: 0
  • Status: offline
2019/09/27 05:56:33 (permalink)
0

RN4870/71 How to get list of programmed commands

Hi, I am wondering if there is a command to get a list of what has been programmed into the RN4870/71 so far.  When going through development, sometimes I forget what I have loaded into the device when trying different settings.  I used another BT classic module some years ago with similar ASCII command set and I was able to get a full list of the current state of the module.   
#1

3 Replies Related Threads

    RodMcM
    New Member
    • Total Posts : 7
    • Reward points : 0
    • Joined: 2016/04/27 18:34:26
    • Location: 0
    • Status: offline
    Re: RN4870/71 How to get list of programmed commands 2019/10/07 20:05:40 (permalink)
    #2
    baseball07
    Starting Member
    • Total Posts : 37
    • Reward points : 0
    • Joined: 2010/09/17 17:19:23
    • Location: 0
    • Status: offline
    Re: RN4870/71 How to get list of programmed commands 2019/11/01 13:26:48 (permalink)
    0
    The commands in that section do not give all the information of the current state of the device.  
    #3
    Silicon Messiah
    New Member
    • Total Posts : 2
    • Reward points : 0
    • Joined: 2019/09/11 02:11:56
    • Location: 0
    • Status: offline
    Re: RN4870/71 How to get list of programmed commands 2019/11/19 09:58:03 (permalink)
    0
    So far the only way I found to do it is using the Get command for each parameter but no complete list whatsoever
    #4
    Jump to:
    © 2019 APG vNext Commercial Version 4.5