• AVR Freaks

Hot!Change in output in 1.40 vs 1.32

Author
vsimkus
Starting Member
  • Total Posts : 19
  • Reward points : 0
  • Joined: 2011/10/30 09:11:57
  • Location: Louisiana
  • Status: offline
2019/08/24 12:20:43 (permalink)
0

Change in output in 1.40 vs 1.32

Good afternoon
 
v1.32 of the X16 tool chain used to produce an interrupt vector map as part of its build output (see below).  Due to some past traumatic experiences with linker weirdness and interrupt vectors, seeing this output on build gives me a warm and fuzzy feeling.  Is there any way to get it back?

Ivt Memory  [Origin = 0x4, Length = 0xfc]

section                    address   length (PC units)   length (bytes) (dec)
-------                    -------   -----------------   --------------------
.ivt._T1Interrupt             0x1a                 0x2             0x3  (3)
.ivt._T2Interrupt             0x22                 0x2             0x3  (3)
.ivt._U1RXInterrupt           0x2a                 0x2             0x3  (3)
.ivt._ADC1Interrupt           0x2e                 0x2             0x3  (3)
.ivt._SI2C1Interrupt          0x34                 0x2             0x3  (3)
.ivt._CNInterrupt             0x3a                 0x2             0x3  (3)
 
Thanks
Vic

Punctuality is the virtue of the bored.
#1

2 Replies Related Threads

    du00000001
    Just Some Member
    • Total Posts : 2998
    • Reward points : 0
    • Joined: 2016/05/03 13:52:42
    • Location: Germany
    • Status: offline
    Re: Change in output in 1.40 vs 1.32 2019/08/24 15:43:26 (permalink)
    0
    Do you get a map file at all?

    PEBKAC / EBKAC / POBCAK / PICNIC (eventually see en.wikipedia.org)
    #2
    vsimkus
    Starting Member
    • Total Posts : 19
    • Reward points : 0
    • Joined: 2011/10/30 09:11:57
    • Location: Louisiana
    • Status: offline
    Re: Change in output in 1.40 vs 1.32 2019/08/24 15:52:50 (permalink)
    0
    Yes, the map file is generated and the vectors are listed in there, but I'm hoping to get the output back into the standard build output so that I don't have to take an extra step and read through the map file.

    Punctuality is the virtue of the bored.
    #3
    Jump to:
    © 2019 APG vNext Commercial Version 4.5