• AVR Freaks

Hot!Developing a KEELOQ Decoder.

Author
JanB
Starting Member
  • Total Posts : 33
  • Reward points : 0
  • Joined: 2013/02/08 10:17:47
  • Location: The Netherlands
  • Status: offline
2018/08/20 09:21:30 (permalink)
0

Developing a KEELOQ Decoder.

Developing a KEELOQ Decoder.
 
As my MCS3142 Key Fob is working very well with the DEV Board DM182017-4, it is time to develop an Decoder.
 
I want to make two Decoders, one for a Classic system and one for a Classic / Ultimate system.
For the Classic system I want to make use of an HCS512 device and for the Classic / Ultimate system an PIC24FJxxxx because of the internal Crypto Engine.
 
I hope that the above device choices are a right decision. If not than please tell me.
 
I have the KEELOQ Plugin 0.20 in MPLAB X 5.00. Unfortunately all the options for the Decoder (HCS5xxx Chips) are not available in this plugin.
 
So, how I must program this HCS512 Device?
 
For the Ultimate KEELOQ I need some files for MPLAB X. I have almost all the ANxxxx documents with source codes from the past 25 years. I hope that someone can help me to program this PIC24 device with the right files or to tell me how to do this.
 
For now I have read all the ANxxxx documents. But this is not bringing me further.
 
I hope that someone can bring me in the right direction to finish this project. Really.
 
Thanks.
#1

0 Replies Related Threads

    Jump to:
    © 2019 APG vNext Commercial Version 4.5