Hot!MCCP Setup gives wrong C Code

Author
Mollering
New Member
  • Total Posts : 1
  • Reward points : 0
  • Joined: 2018/02/13 09:04:13
  • Location: 0
  • Status: offline
2018/02/16 03:34:34 (permalink)
4 (1)

MCCP Setup gives wrong C Code

MCC version:   3.45.1
MPLAB X version: 4.10
Operating System and version: Microsoft Windows 10 Pro 10.0.16299 Build 16299
Compiler version:   XC16 v1.33
Device name:   PIC24FV16KM202
 
Steps:
Using MCC to configure MCCP1 for this Device.
Mode Selection: Compare.
Mode: Dual Edge Compared, Buffered (PWM Output Mode).
(Choose output channels and Compare Values for the Module.)
Generate C Code.
 
Problem:
Code for mccp1_compare.h has different function declarations than mccp1_compare.c (see Navigator sections on attached screenshots).
 
Workaround:
Manually edit the function names so they are the same.
 
#1

2 Replies Related Threads

    pr.mchp
    New Member
    • Total Posts : 20
    • Reward points : 0
    • Joined: 2015/03/23 06:20:48
    • Location: 0
    • Status: offline
    Re: MCCP Setup gives wrong C Code 2018/07/11 05:28:27 (permalink)
    0
    Hi
    Thank you for reporting this issue.
    It will be fixed in the future release.
     
    Thanks
    MCC team
    #2
    pr.mchp
    New Member
    • Total Posts : 20
    • Reward points : 0
    • Joined: 2015/03/23 06:20:48
    • Location: 0
    • Status: offline
    Re: MCCP Setup gives wrong C Code 2018/07/11 19:55:10 (permalink)
    0
    Hi
    Thanks for reporting this issue. 
    This issue will be prioritized and will be fixed in the future release.
     
    Thanks
    MCC Team
    #3
    Jump to:
    © 2018 APG vNext Commercial Version 4.5