MPLAB X v5.40 ICD4 Tool Pack Update:Version 1.2.804 of the ICD4 Tool Pack has been released, this will fix a bug where ICD4 Rev 5 units would not connect to devices. Please update your tool pack in MPLAB X by going to Tools->Packs then select the Tools Packs tab and under ICD4 you will see the 1.2.8..
Go to the MPLAB X "Start Page" tab Then Click on "Learn and Discover" Then Click on "Users Guide and Release Notes" Then under "Device Support" click on "Device Support list R/Y/G Tool Support" There is all the status of all the devices and the tools...
Forum GuidelinesWelcome to the Microchip web conferences. We hope you'll use this area productively. Before posting, please read these guidelines: Remember: This conference is only one channel of community-supported technical support. Urgent support issues, such as critical bug reports, should go to..
I've got an ICD 4 (and a PICkit4 and a PICkit3) that shows up in Windows Device Manager as a "Microchip WinUSB Device" but doesn't show up in MPLAB X on one machine (Dell XPS 13) but shows up in MPLAB X fine on another (Lenovo ThinkPad T480) and does a little of both in MPLAB X on an older ThinkPad ..
I screwed up & let some smoke out. I pulled my ICD4 apart and found physical damage to a component labeled FB3, which looks like a capacitor. Before I spend $250 for a replacement, I'd like to see if replacing that one part fixes mine. Help appreciated...
Hello,I am struggling to get the debugging on dsPIC33EP512MC806 working with ICD3 debugger. Any hints/direct help will be much appreciated. The problem is as follows- When I try to debug an application in MPLAB X IDE (v5.40) with the help of ICD3 debugger, I get the below error. In fact, I get the s..
Trying to determine what is required for programming/debugging the SAM D5x/E5x devices. Right now am using an X-Plained Pro board but will soon have the real board. Will an ICD 3 work or is an ICD 4 required? I tried using the Device Support table but it doesn't list the SAM devices. *** EDIT - fina..