This thread Microstick Development Board for dsPIC33F & PIC24H can be found under development tools...
Microchip Forum Guidelines By proceeding to post you agree to follow these guidelines. OUR MAIN GUIDELINE: We require all posts to be polite, constructive, and on topic. If you do this, the rest of the guidelines won't need more than a cursory review. Section I - The Golden Rules: Be respectful of a..
I first started a project as a learning experience to see if I could "self" optimize C codefor a faster execution using (PRO opt = 3) and found some trick's that make code fasterthe first one using direct addressing by 1and0 makes a big difference when expanded out to 4 bytes// ADC = ((ADRESH << 8) ..
hello everyone,currently im working on a project where i have to interface hc-sr04 sensor with pic18f45k20 and currently im having difficulties in displaying the distance. can anyone suggest why timer1 will not stop when echo goes high?
the coding is bellow thanksmplabx IDE v5.40xc8 v2.30..
HI all,I'm currently working on a project involving ultrasonic sensor but i have trouble putting calculations on the LCD display(16x2).When i run code inside while loop echo goes low and turn timer1 On but it wont go high.I ve attached my code.Can anyone have o look on it please?Thanks..
Hi all,I am struggled with programming my pic . It will let me debug without errors has only some warnings but it wont display results on LCD.Other issue is with the loop that timer is turn ON/OFF.It will turn on the timer when Echo goes lo but it never stop timer. If anyone can have a look on my co..
Hi, I try to create a project with a PIC12LF1572 (XLP). It is neccesary that the chip runs with less than 1 uA.
The PIC is normally in the sleep mode and I wake it up by a pinchange interrupt. Everything works fine, but the chip allways consumes 7uA@3V3. The PIC is clocked with 1MHz without PLL. Th..
I'm trying to bring up I2C on MSSP2 on PIC18F66k40 to read fuel gauge and RTC chip. During the read, after sending control addresses sequence , reading the first byte returns the read address. It seems that I'm forgeting something preparing to read the byte, but cannot figure out what's exactly. Sol..