The example below shows the essential commands needed to join a LoRaWAN network using ABP join. Also some optional commands are shown. This process uses mainly 'mac' level commands, although a few 'sys' commands are used as well. The test mode 'radio' commands are not needed when using the LoRaWAN m..
The example below shows the essential commands needed to join a LoRaWAN network using OTAA join. Also some optional commands are shown. This process uses mainly 'mac' level commands, although a few 'sys' commands are used as well. The test mode 'radio' commands are not needed when using the LoRaWAN ..
The RN2xx3 family of products are designed to support the LoRaWAN open standard as published by the LoRa Alliance. The LoRaWAN architecture dictates a hierarchical structure of gateways and network/application servers and has no concept of P2P communication. It is defined this way to support IoT app..
Its a common mis-conception that LoRaWAN protocol = subscription to a public network. The LoRaWAN specification describes the protocol and network architecture, but there are no constraints on how it is deployed. Even the LoRa Alliance avoids dictating anything about business model. FLEXIBILITY is o..
It sounds like you're connecting to an 8 channel gateway. RN2903 firmware is designed to match the LoRaWAN specification and the specification describes a 64(+8) channel plan, making best use of the available spectrum in the 915MHz band. But the reality is that 64(+8) channel gateways are still expe..
We are trying to verify the CW functionality of RN2903A with our LoRaWAN gateway. Initially we have tried to send LoRa & FSK packets from the LoRa node & were successfully received at LoRaWAN gateway. When we set RN2903A module in CW mode, we don't receive any packets at LoRaWAN ga..
My knowledge of the complex world of hardware licensing is at noob at best. We are developing a communication system for water machines stationed across the US, about 700 of them. MY question is can I incorporate a SAM R34 into my circuit board without worrying about licensing, or is that an illusio..
Hello, I have a couple of SAMR34 Xplained demo boards. I have created peer-to-peer communications between the two, with no gateway (my applications does not want a gateway). I have been testing them but am not getting much range. My settings are power=20, boost=enabled, frequency=915.5MHz, SF=12, BW..
MC Team suggests me to develop this MCU Lora chip. The application frequency spectrum can be programmed through its firmware. It is actually a Software Defined Radio chip. Thus, you don't have to re-program it for every business region. Lets discuss. SAMR34 Xplained Pro Evaluation Kithttps://www.mic..
Hi there, First of all, I would like to introduce you roughly the project we are working with right now. It is mainly a project for industry 4.0, where we are meassuring different sensors (temperature, humidity, and so on) with some devices, and sending this information through LoRaWAN by using the ..