Hello, i have a problem implemintig a bluetooth connection with the RN4871 to a controller where is cannot modify the software. So every time when i connect to the RN4871 with my mobile divice, it sends out the status string which cuases the controller to reboot. The Controller does not have an opti..
I've integrated the RN4678, and it took be a lot of time to make it work compared to other modules I worked with in the past.
As you can see on other topics, the documentation is full of errors and approximations. The technical support is also a nightmare, looks like they don't know the pro..
Hi: I am totally new to the Bluetooth development process...I just received my BM-78-Pictail development board. Following all the instructions I cannot get my Android phone Bluetooth to recognize the new board. I am using the BT Chat app on my PC and the BtChat app on my phone as directed. Is it REQ..
Hello, I'm using the RN4871 module in a pcb connected through uart to a SAMR34 module.The base usage I need the RN4871 to do is low power advertisement, but current doesn't accords to datasheet specifications. Same thing with dormant/deep sleep.I get current measurements of 20mA when the module "ent..
I am writing an Android App for the RN4871 module now my iOS version is working and I am getting a command error when setting new connection parameters. When setting up my device I set the connection parameters to Apple Defaults (Command "ST") as set in the Datasheet but setting the them instantly u..
Hello,I'd like to connect my RN4871 module with a laptop via Bluetooth.My question is : Is there an equivalent of smart discover app for PC ?Thank you.Bruno..
My app was previously working with the BM70. I never had this problem. With the RN4870, as soon as I am bonded and connected, the module disconnects. To verify it is not my app causing the problem (which was working in Transparent Mode with the BM70 without issue), I used the Smart Discovery app and..
I sent the SN,1 command to return the RN4870 to factory configurations as a way of clearing the device before trying a different configuration. However, now I can no longer get the device into command mode ($$$) either by the MCU or through a serial terminal. I know the factory reset values are in p..
Hi Gents,I've just received some BM62 bluetooth module, I've mouted them on my PCB design.According to the steps described on the DevKit manual I've done the following steps :- Generate the .txt file with the DSP parameters using DSPTool_IS206x_012_DualModeSPK1.1_v1.06.exe- Generate the .txt file wi..
Has anyone been able to successfully use whitelisting with an Android device. I have done some preliminary investigations into a product I am developing. I would like the product to be capable of whitelisting a single client so that it only reconnects with that client until the peripheral is instruc..