We have put up a web page to help people analyze problems with MPLAB ICD 2. If you have additional information on a problem that you've solved, please add to this thread, and we'll add that info to the web page if it can be of help to others. www.microchip.com/icd2help..
I have developed several products using in-circuit programming of PICs without any problems. However, the latest product is causing problems: The design uses a PIC16F876A running at 3.3V. The PGC and PGD pins are dedicated solely for programming, and MCLR has a 10K pull-up, but is also taken to the ..
Tools: ICD3/REAL ICE/PICkit 3 Device: 18F46K22 family Version affected: MPLAB IDE v8.63 We have found a programming issue affecting the 18FxxK22 family of devices. During programming of the device in the debug mode, you will see this: The following memory regions failed to program correctly: Debug E..
MPLAB REAL ICE, MPLAB ICD 3, and PICkit 3 debugging support does not work for the following Processor Extension Paks in MPLAB IDE 8.53: AC244023 PIC18F14K50-ICE Processor Extension Pak AC244024 PIC18LF14K50-ICE Processor Extension Pak AC244033 PIC18F14K22-ICE Processor Extension Pak AC244034 PIC18LF..
This forum now supports MPLAB ICD 2 and MPLAB ICD 3 in-circuit debugger/programmers. See the MPLAB ICD 3 page for information on the newly released ICD:
Watch the videos here: http://www.youtube.com/watch?v=j8RXbZ2gOSY
Welcome to the Microchip web conferences. We hope you'll use this area productively. Before posting, please read these guidelines: Remember: This conference is only one channel of community-supported technical support. Urgent support issues, such as critical bug reports, should go to our technical s..
Not having done any embedded development for a few years now, I am looking at a project in which the PIC32MZ0512EFK064 seems the most likely candidate. For development, I am hoping to use my MPLAB ICD3 which has been lying in a drawer untouched for ages.So, a simple question that I can't seem to fin..
The ICD3 cannot connect to the PIC any more. I tried with another ICD3, which works, left all cabling (to PC and to PIC), only switching ICDs back and forth. The one in question kept telling me
> > Connecting to MPLAB ICD 3...
> > Currently ..
I'm trying to debug a PIC24FJ1024GB606, the device is detected, programmed but when tries to run I get this error.Launching
An error occurred in the debugger. Terminating the debug session.
com.microchip.mplab.mdbcore.debugger.DebugExceptionUser program finished It doesn't spec..
I am trying to develop a small program using an ICD 2 LE. When I connect to the ICD, there is no pop up for the drivers. When I look up the device manager, there is no entry for the device, so I can't update the drivers. What is going on? I've tried plugging and unplugging the ICD but nothing happen..