From both forum and customer feedback we feel there may be some challenges in getting started with MPLAB Harmony 3 in general. We hope all of the required information is out there, but finding it may be a challenge to some. So here are some tips to help you get started. The basics:There is no Harmon..
Welcome to the MPLAB Harmony Forum!
Microchip MPLAB® Harmony is the result of a holistic, aggregate approach to creating firmware solutions for embedded systems using Microchip PIC32 microcontrollers. It is a framework of system services, device drivers, and other libraries that are built upon a ba..
Hello I am currently setting up the USB on a custom board, and facing some problem.
The board is using a PIC32MZ, tighted with a USB hub 1->3 from Microchip (USB2513).
So far, using Harmony v3, I have been able to setup the PIC32MZ as a USB host for MSD, and able to detect some USB sticks on eac..
I'm trying to get a TWI slave example setup on my SAM E70 Ultra board using the harmony 3 drivers for the TWIHS0. I'm stumbling through this and I tried following the flowchart for slave read reception in the SAM E70 Manual but when i try to use my known working I2C master program the TWI slave hold..
Is it just me or is there something wrong with the Configuration Manager in the Project Properties tool in MPLAB 5.45 / Harmony 3? I can create new MPLAB Harmony projects and I load demo projects just fine, but creating a new, duplicate or renaming an existing functional configuration fails. It will..
Hello Everyone,I have been using Harmony 3 for a while now to work on a custom made ATSAMD21G18A 32-bit processor.Since I updated to MHC 3.6.1 I noticed that every time I open the configurator The "Load state" button is missing from the menu.I used to be able to load a previously made .xml file from..
I thought there used to be Harmony support for this chip,did Harmony 3 drop support for the MX family? If so, is there a direct pin for pin chip replacement for the PIC32MX340F256H?..
I have found a problem with Hv3, MPLABX v5.45 on a Win10 box using the SAM E70 Xplained Ultra kit. I submitted a support ticket but no solution yet, so I am trying to track the source myself.
The error occurs when I do a project rename in which the original project contains the usb library and/or..
I recently updated Harmony and ran into the following issue. Wanted to throw it out there in case someone runs into the same issue and to see if anyone has thoughts on it. I am pretty conservative when I make an update, I basically go through and check every change the configuration tries to make, a..
Hi, I have previously used both the old MLA stack and Harmony to develop several modules and they have all broadcast several packets over UDP at power up (TCPIP announce) to provide the hostname and IP address. The latest module that I have been developing with the latest harmony stack doesn't broad..