Welcome to the Microchip web conferences. We hope you'll like the format. Before posting, please remember these guidelines: Remember: This conference is only one channel of community-supported technical support. Urgent support issues, such as critical bug reports, should go to our technical support ..
Hi! I'm new to the PIC32MX-Family, so here is my problem: I have tried to write some data to an external ADC via the I/O pins, but the SCLK-frequency was way beyond my expected value. So i tried the following code to check the fastest speed to toggle an Output, but it results only in 1.25 Mhz... Dev..
When using the MPLAB ICD 2 in MPLAB IDE make sure the configure->configuration bits window is is closed when not in use. This will reduce lock-ups. From the MPLAB ICD 2 readme in the MPLAB IDE 8.20 release notes
ICD2-322: PIC32 debugging using MPLAB ICD 2 under MPLAB IDE may lock-up on heavily load..
Open-source implementations of those, ie liba52 has existed for a long time. Does any code or libraries exist for Microchip chips? The requirement is to read an S/PDIF stream and break it into individual 5.2 or 7.2 channels as I2S or S/PDIF. Is this doable? Yes, I know that there are special chips f..
Hey guys. I am using a PIC32MX795F512H with a 1MHz SPI, trying to communicate with slave. Usually there's four bytes in order to read a register, but the length is not fixed to four in general. Right now, it goes like this: Put four bytes in an array, set the number of bytes I want to send and then ..
Murton Pike Systems
I have a USB oscilloscope project previously based around 72MHz PCI32MX274 which works great up to about 20MHz sampling rate. So I decided to try an atsame70 300MHz processor on my next version.1/ I cant get PWM to work for calibrate output.2/ If I sset PCK0 faster than 12MHz it crashes the processo..
I have a problem with only some timestamps being returned in the event fifo, it appears to be randomly skipping 1 or more timestamps, occasionally it works as expected for a few packets before skipping again. Discontinuities can be seen in the message markers but the MCAN_TXEFS.EFGI is continuous so..
Hello Microchip Community, Below is a link to a project that I've worked on over the years and have made it available on Github:https://github.com/pic32/NexOSIt is a RTOS that currently runs on the PIC32MX line of microcontrollers.It's a hobby and a passion for me and I hope to get feedback on the p..
SAM E51 Curiosity Nano
Features: ARM Cortex-M4 running at 120MHz 1MB of Flash 256KB SRAM 2x CAN-FD 8x SERCOM Modules onboard user LED & Switch onboard 32.768kHz cry..
Hello all ! I'm trying to program my ATSAMC20G16A with my pickit4 but it won't allow me. It is always giving me this error : Connecting to MPLAB PICkit 4...<br /> <br /> Currently loaded versions:<br /> Application version............00.06.47<br /> Boot version...................01.00.00<br /> Scrip..