With the release of MPLAB X 3.20 simulator users now have the ability to create simulator specific plug-ins! These plug-ins allow the simulator to be customized in many ways. Users can implement missing peripherals that are critical to their applications, or they can replace existing peripherals wit..
SCL is the Stimulus Control Language, adopted by Microchip as the foundation of external stimuli generation for MPSIM. SCL looks like a dialect of VHDL (Very high-speed IC Hardware Description Language). According to JasonK of Microchip, SCL is similar, but not a direct subset of VHDL.
Welcome to the Microchip web conferences. We hope you'll use this area productively. Before posting, please read these guidelines: Remember: This conference is only one channel of community-supported technical support. Urgent support issues, such as critical bug reports, should go to our technical s..
i tried to use MPLAB-X Logic Analyzer (simulation on 12F509) on version v5.40 without success. I read that there was a known issue with this version on the Logic Analyzer (see mail GeorgePauley June 30, 2020 4:00 PM). I downloaded the v5.45 but it doesn't work either.
Does anyone know if thi..
Hi Is it possible to simulate a framing error? I've tried a few things including pulsing the RX pin low for about 2 character times using an Async stimulus and using a Pin/Register Action to force the bit directly, but without success. MPLAB 5.45 on Linux x64 Any ideas? Thanks John..
The TIMER0 overflow event flag in PIR0 bit TMR0IF is not set when TIMER0 overflows. Support Case: 00578752 <EDIT> MPLABX v5.45XC8 v2.30Windows7-Pro 64-bitThe Microchip MCC version is what ever installed with MPLABX v5.45..
HiI am trying to simulate with MPLABx 5.40 a simple assemply program on PIC16LF877A. After strart debuging when pause the execution the following message occures:"No source code lines were found at current PC 0xf. Open program memory view to see instruction code disassembly."But when I open the prog..
The MPLABX v5.45 simulator has a bug with the PORTB bit RB12 for the PIC24FJ64GA202 controller.
When configured as an output bit, setting or clearing the LATB12 in the LATB register does not change the value read from the PORTB register.
A write to the PORTB register does change the state of L..
The attached MCC project for MPLABX v5.40 configures a PIC18F27Q10 to output a 50% square wave on RC1. The fault is the simulation stops as soon at the EN bit in the CCP2CON register is set. I know Microchip has thousands of test vectors for the simulation tool but, how does a coder fail to check th..
I'm trying out the example at https://www.microforum.cc/blogs/entry/6-using-the-mplab-x-simulator-to-debug-uart-code/It worked fine using the PIC16F18875 but not with a PIC18F27K42.I generated a new project (MPLAB X v5.40, XC8 V2.30) for PIC18F27K42 and set it up using MCC with Uart1.If I un-tick "E..