Hi, I'm currently trying to get a serial bootloader running for the PIC24FJ1024GA606. The bootloader is based on AN1157 and has been running without issues on the PIC24FJ128GA204 we use in other projects for years.I have modified linker scripts for both the bootloader and the app part. They are base..
I want to use the sleep mode for a Communicator.
It should fall asleep after serveral attempt of failling to implement communication.
My problem is that it seems to go to sleep but wakes up immediately.
It should only wake up on an ext Interrupt on Pin RB14.
Do i forgot some..
Hi, I have done extensive research on the forum but it seems like my problem has not been discussed before.I have successfully made a bootloader app for PIC24HJ256GA210A. This I can upload in itself using MPLABX ICD4, no issues. I have also made an app which I try to load as well to the PIC, but her..
I am trying to create a bootloader for PIC24 using MCC. I created a new project, generated the bootloader app with MCC then tried to build. I get these errors:Link Error: section .config_JTAGEN%115 overlaps section .config_JTAGEN%6 Link Error: section .config_IESO%116 overlaps section .config_IESO%7..
If have implemented the MLA and use the demo source. But USB stick is not mounted. Hardware SUPER simple on a experimental board. Short lines and USB stick is power by 5V. PIC is power on 3.3VUsing a PIC24FJ64GB002 on 16MHz. Try to solve it by reading a lot of posts on the forum and the web but not ..
My latest project uses a 4x20 LCD to show different lines of fixed text. These are stored in programme space (using "asciz") and accessed using "#psvpage" and "psvoffset" to transfer the text into a RAM buffer before processing to write to the display (in 4 bit nibbles). I've written a very long win..
I found I needed a 32 by 32 bit divide routine in order to preserve resolution in a motor control application. This involved stepper motor accel/decel calculations in less than 50uS for a 16MHz cycle frequency. Processor is a 24FJ64GA102. Couldn't find anything after an internet search so it became ..