Microchip Forum Guidelines By proceeding to post you agree to follow these guidelines. OUR MAIN GUIDELINE: We require all posts to be polite, constructive, and on topic. If you do this, the rest of the guidelines won't need more than a cursory review. Section I - The Golden Rules: Be respectful of a..
Hello there,I'm trying to connect a MIDI Keyboard to a PIC24FJ64GB002.I've successfully managed to compile and run the example in the MLA that allows to connect a Computer Keyboard.I've been trying to understand how to connect the USB Keyboard now. I've noticed that there is a "driver" for it under ..
PIC24FJ256GB106 We are driving a pair of LED's with Port B bits B13 and B14. The LED's are a simple operational mode indication. Sourcing about 4 mA per pin. We have been through checking all of the alternate functions of Port B13, Configurations etc without getting any closer to solving our problem..
Hi everyone, I'm trying to make working the usb host hid mouse of the mla on a PIC24FJ64GB002 on a breadboard. So I've adapted the code of the example because I don't have all the required HW (LCD for example) and I adapted it to output some states on LEDs. If I'm posting here, it means I have not m..
I am trying to cast float to bitwise int in C. Here's my code snippet:
write_eeprom(INDEX_CONFIG_TEMPERATURE_OFFSET_HIGH_INT, (unsigned int) (temperature_offset>>16));
write_eeprom(INDEX_CONFIG_TEMPERATURE_OFFSET_LOW_INT, (unsigned int) (temperature_offset));
I am getting the following error:
I'm using "interrupt on change" to detect motion of a low cost rotary encoder and have encountered a weird problem when servicing a resulting interrupt. On entry to the ISR I push the shadow registers then (hopefully!!) clear the interrupt flag. As far as I can tell when debugging, this never happen..
I'm new to pic but experienced in other microcontrollers I'm doing a project for PIC24F family with a bootloader. I have the bootloader and the code of the app already done, and it works.Actually what i do with mplab X is import the gld file of the bootloader to the project, in linker files section...
I have a bootloader working for mplab x IDE v4.2 for years. It is compilated with XC16 1.35.We are updating it to be used on MPalb x IDE v5.40. I have been able to make this by creating an example of ezbl and replacing the files with my code from version 4.2. I had to make small changes to certain f..
Greetings People, I am new to PIC family. Previously i was working on 89S8253 processors. I have a new requirement where i need to interface PIC24FJ64GB002/4 to my 89S8253 where my controller(89S8253) will send data to PIC controller on Uart Port. Once PIC receives the data i need to store that data..
Hi, I'm currently trying to get a serial bootloader running for the PIC24FJ1024GA606. The bootloader is based on AN1157 and has been running without issues on the PIC24FJ128GA204 we use in other projects for years.I have modified linker scripts for both the bootloader and the app part. They are base..