Hello, I want to start a LED Application with the dspic33FJ128MC802, I think the first I need to do is control an RGB LED and change color with the PWM. But because there is no much information about this topic for dspic33 (what I found is for dspic30) I prefer to ask the experts if it's possible wi..
Microchip Forum Guidelines By proceeding to post you agree to follow these guidelines. OUR MAIN GUIDELINE: We require all posts to be polite, constructive, and on topic. If you do this, the rest of the guidelines won't need more than a cursory review. Section I - The Golden Rules: Be respectful of a..
at First Stage(case "OutPul_Mode_PUL_NEG"),the code set PWM module working as "Redundant output mode" and set the "OVRDAT<1> provides data for output on PWMxH pin" and "OVRDAT<0> provides data for output on PWMxL pin" to close the PWM output , at this state ,if use this code ..
Greetings Usually the exposed pad for an IC is connected to ground. However in the datasheet for dsPIC33CK64MP105 FAMILY, I could not find any instruction regarding connections to exposed pad. Should I connect exposed pad to Ground or leave it floating? Thanks and Regards..
Well, seems I can't delete the post... that's embarrassing. Also, It won't let me post what I actually want to (or edit this with what I actually want to). So I'll just link to my stackoverflow question and hope that works.....
Greetings I am planning to use DSPIC33CK32MP102 for an application that needs time-critical conversion of single ended analog inputs of SAR ADC. For this I am planning to use dedicated core as shown in the image below. For 28-pin UQFN package, ANN0 and ANN1 are not available (see the complete pin fu..
Greetings The screenshot below is from the "12-Bit High-Speed, Multiple SARs A/D Converter (ADC)" document. Knowing the values of Rss, Ric and Chold is important in being able to calculate minimum sampling time. I am planning to use DSPIC33CK32MP102-E/2N from dsPIC33CK64MP105 FAMILY of microcontroll..
How can you start the ADC in assembly? I use an .s file for the assembly code that works fine in itself.In for instance PIC18 assembly one can use: "bsf ADCON0, GO, ACCESS"But if I try this with let's say: "bset ADCON3L, CNVRTCH" for the dsPIC33, I get an "Invalid operands specified ('bset.b ADCON3L..
I'm using 5.10 currently and officially it doesn't appear to support the version of MCC I'm using (3.95) though it has worked so far. Not sure which XC16 as I'm not on the right computer to check right now. Trying to switch to a newer MPLAB gave me what looked like a junk folder, something like ".ge..
I am using DSPIC33EP512MU810 for the first time and am having trouble setting it for Device USB HID Operation. The mcc only supports CDC and Vendor for this device. Microchip's HID documentation is from 2008, and 2015, and does not describe how to setup HID in latest MLA (which has HID files from 20..