Microchip Forum Guidelines By proceeding to post you agree to follow these guidelines. OUR MAIN GUIDELINE: We require all posts to be polite, constructive, and on topic. If you do this, the rest of the guidelines won't need more than a cursory review. Section I - The Golden Rules: Be respectful of a..
I get the error message when trying to program my IC. It is a very simple program to flash an LED On/Off. I tried to switch to high voltage program entry mode but then it give a target voltage not detected error. The only thing I have connected right now is the LED/resistor to pin 9 and a .1uF cap b..
The PIC24F16KL402 family has 3 selectable pairs of programing pins that are configured in register FICD as detailed on page 181 of the data sheet. The datasheet lists PGEC1/PGED1 as the default programming pair but the 14 pins devices don't have PGEC1/PGED1. So what are the default programing pins f..
I'm using PIC24FJ128GA705 with many pins already used.LATC1 does not change from 0 to 1...
Hi, I have a problem with the dspic33fj32GP104 microcontroller, because I have to generate 4 PWM outputs for the LED strip control, I don't know what options I have to generate these signals with this microcontroller. I appreciate any help you can give me, because it is not possible for me to change..
Hi,I am trying to implement Modbus RTU on dspic33ev256gm106 using 8mhz external crystal. I have used MCC code configurator for coding. But it can't transfer data.I use ADM2481 RS485 Transceiver. I connect the pin with dspic33evRC0 --> RxDRC1 --> TxDRC2, RC11 --> /RE, DE RS485 code:void RS485_write(u..