Dear Microchip Customers,
It is with pleasure that we announce a new initiative that serves to help you in your dsPIC Code Development Efforts.
We now provide code examples (abbreviated CE) on our website. These code examples are complete MPLAB IDE projects/workspaces that are self-contained, ..
Microchip Forum Guidelines By proceeding to post you agree to follow these guidelines. OUR MAIN GUIDELINE: We require all posts to be polite, constructive, and on topic. If you do this, the rest of the guidelines won't need more than a cursory review. Section I - The Golden Rules: Be respectful of a..
We've added two new forums, one for dsPIC33 product discussion and one for PIC24 discussion. Please use these when dealing with issues specific to those families...
Dear Microchip dsPIC Customer,
This notice is to inform you of a fix specifically addressing programming issues you may encounter when using ICD 2 units (revisions R15 through R20) with the dsPIC30F2010.
One of the following solutions can be implemented:
1. Open the powered ..
Hi everyone, Though I've been consulting this forum for a while, this is my absolute first thread, so I apologize in advance if I haven't included some critical information needed to troubleshoot my issue. I've looked around here (and other online resources) for hours but I haven't seen anything tha..
This is a test thread...
I am going through the AN1708 to understand FOC control and have a basic question. The motor model discussed in Equation 1 in the app note refers to a single im, R, L and bemf. For the 3-phase PMSM motor are these equations replicated 3x in the code to compute the values for each phase?..
I have just come across an issue with programming a dspic30f5011 in the MPLab IDE (v8.83) using the ICD3. I have programmed these chips previously and have been successful. Nothing new has been added to the project or the circuit. I have attempted to do 10 of this board and have had a 70% fall out r..
Hi, I'm new here and this is my first post :D
I'm trying to make a phaser guitar pedal using a dsPIC33FJ128GP802 and the Microchip's FFT/iFFT library functions.
I did all the hard calculations and finally get the board working in playback mode. It does what follows in realtime:
sample 128 sampl..
Hi All, Im working through AN1078 and porting the FOC code across to some already existing firmware for the dsPIC30F6010A. We have a board currently in development which incorporates the three phase current measurments and voltage monitoring at the phase outputs. The intention is to stick closely to..