Atmel BLDC Sensorless on ATAVRMC100 Modules

Here is a list of all modules:

• ADC Defines Configuration Values
  • DAC Defines Configuration Values
    • AMP1 Defines Configuration Values
      • COMPARATORs Defines Configuration Values
• ADC Module
  • ADC Macros
    • Turn on the ADC
    • ADC Alignement Configuration
    • ADC High Speed Mode Configuration
    • ADC Vref Configuration
    • ADC IT Configuration
    • ADC Prescaler Configuration
    • ADC Channel Selection
    • ADC Start Conversion
      • ADC Start Normal Conversion
      • ADC Start Idle Conversion
    • ADC Get x Bits Result
    • Turn Off the ADC
    • conversion is finished or not
  • ADC Low Level Fucntions
• Amplifiers Modules
  • Amplifiers Macros
    • Amplifier 0 Macros
      • Turn on the Amplifier 0
      • Amplifier0 Input shunt
      • Amplifier 0 Gain Configuration
      • Amplifier 0 Clock Selection
      • Turn off the Amplifier 0
    • Amplifier 1 Macros
      • Turn on the Amplifier 1
      • Amplifier1 Input shunt
      • Amplifier 1 Gain Configuration
      • Amplifier 1 Clock Selection
      • Turn off the Amplifier 1
  • Amplifiers Low Level Functions
• Comparators Modules
  • Comparators Macros
    • Comparator 0 Macros
      • Turn on the Comparator 0
      • Comparator 0 Interrupt Enable
      • Comparator 0 Gain Configuration
      • Comparator 0 Negative Input Selection
      • Turn off the Comparator 0
    • Comparator 1 Macros
      • Turn on the Comparator 1
      • Comparator 1 Interrupt Enable
      • Comparator 1 Gain Configuration
      • Comparator 1 Interrupt Capture
      • Comparator 1 Negative Input Selection
      • Turn off the Comparator 1
    • Comparator 2 Macros
      • Turn on the Comparator 2
      • Comparator 2 Interrupt Enable
      • Comparator 2 Gain Configuration
      • Comparator 2 Negative Input Selection
      • Turn off the Comparator 2
  • Comparators Low Level Functions
    • Comparator 0 Low Level Functions
    • Comparator 1 Low Level Functions
    • Comparator 2 Low Level Functions
• DAC Module
  • DAC Macros
    • Turn on the DAC
    • Turn Off the DAC
    • DAC Alignement Configuration
    • DAC Output Configuration
    • DAC Set Input Value
    • DAC Low Level Fucntions
• PLL Module
  • PLL Macros
• PSC Modules
  • PSC0 Macros
    • PSC0 Output Configuration
    • PSC0 Mode Control
    • PSC0 Clock Control
      • PSC0 Clock Selection
      • PSC0 Prescaler Control
    • PSC0 Ramp Mode Selection
    • PSC0 Flank Width Modulation Configuration
    • PSC0 ADC Amplifier Trigger Configuration
    • PSC0 Run Control
    • PSC0 Fault Mode Configuration
    • PSC0 Interrupt Configuration
    • PSC0 Interrupt Flag Control
    • PSC0 Comparison Value Initialization
  • PSC1 Macros
    • PSC1 Output Configuration
    • PSC1 Mode Control
    • PSC1 Clock Control
      • PSC1 Clock Selection
      • PSC1 Prescaler Control
    • PSC1 Ramp Mode Selection
    • PSC1 Flank Width Modulation Configuration
    • PSC1 ADC Amplifier Trigger Configuration
    • PSC1 Run Control
    • PSC1 Fault Mode Configuration
    • PSC1 Interrupt Configuration
    • PSC1 Interrupt Flag Control
    • PSC1 Comparison Value Initialization
  • PSC2 Macros
    • PSC2 Output Configuration
    • PSC2 Mode Control
    • PSC2 Clock Control
      • PSC2 Clock Selection
      • PSC2 Prescaler Control
    • PSC2 Ramp Mode Selection
    • PSC2 Flank Width Modulation Configuration
    • PSC2 ADC Amplifier Trigger Configuration
    • PSC2 Run Control
    • PSC2 Fault Mode Configuration
    • PSC2 Interrupt Configuration
    • PSC2 Interrupt Flag Control
    • PSC2 Comparison Value Initialization
    • PSC Structure Definitions
    • PSC0 Low Level Fucntions
    • PSC1 Low Level Fucntions
    • PSC2 Low Level Fucntions

---