- a -

• AT45_CMD_BUFFER_1_MAIN_MEMORY_PROGRAM_WITH_ERASE : at45.h
• AT45_CMD_BUFFER_1_WRITE : at45.h
• AT45_CMD_CONTINOUS_ARRAY_READ : at45.h
• AT45_CMD_MAIN_MEMORY_TO_BUFFER_1_TRANSFER : at45.h
• AT45_CMD_READ_ID : at45.h
• AT45_CMD_READ_STATUS_REG : at45.h
• AT45_FLAG_PROTECTED : at45_device.h
• AT45_FLAG_VALID : at45_device.h
• AT45_STATUS_COMP : at45.h
• AT45_STATUS_PAGE_SIZE : at45.h
• AT45_STATUS_PROTECT : at45.h
• AT45_STATUS_RDY : at45.h
• AT90USB_EP_ACTIVE_XFER : at90usb_internal.h
• AT90USB_EP_ALLOCATED : at90usb_internal.h
• AT90USB_EP_ENABLED : at90usb_internal.h
• AT90USB_EP_IS_IN : at90usb_internal.h
• AT90USB_EP_WEDGE : at90usb_internal.h

- b -

• BDEV_PRESENT : device.h
• BDEV_UNIT_ATTENTION : device.h
• BDEV_WRITEABLE : device.h
• BLK_OP_READ : device.h
• BLK_OP_WRITE : device.h
• BOARD_SPI_MISO_ID : board.h
• BOARD_SPI_MOSI_ID : board.h
• BOARD_SPI_SCK_ID : board.h
• BOARD_USB_MODE_ID : board.h
• BOARD_XMEGA_RESET_ID : board.h

- d -

• DEBUG_ASSERT : debug.h
• DEBUG_ERROR : debug.h
• DEBUG_INFO : debug.h
• DEBUG_NONE : debug.h
• DEBUG_PANIC : debug.h
• DEBUG_VERBOSE : debug.h
• DEBUG_WARNING : debug.h
• DMA_BIDIRECTIONAL : dma.h
• DMA_FROM_DEVICE : dma.h
• DMA_TO_DEVICE : dma.h

- e -

• EP0_STATE_DATA_IN : at90usb_internal.h
• EP0_STATE_DATA_OUT : at90usb_internal.h
• EP0_STATE_DATA_ZLP : at90usb_internal.h
• EP0_STATE_SETUP : at90usb_internal.h
• EP0_STATE_STATUS_IN : at90usb_internal.h
• EP0_STATE_STATUS_OUT : at90usb_internal.h
• ERR_BAD_ADDRESS : status_codes.h
• ERR_BAD_DATA : status_codes.h
• ERR_BAD_FORMAT : status_codes.h
• ERR_BUSY : status_codes.h
• ERR_FLUSHED : status_codes.h
• ERR_INVALID_ARG : status_codes.h
• ERR_IO_ERROR : status_codes.h
• ERR_NO_MEMORY : status_codes.h
• ERR_PROTOCOL : status_codes.h
• ERR_TIMEOUT : status_codes.h
• ERR_UNSUPPORTED_DEV : status_codes.h

- o -

• OPERATION_IN_PROGRESS : status_codes.h

- s -

• SOFTIRQ_NR_IDS : softirq.h
• SPI_OP_BUFFER : spi_polled.h
• SPI_OP_READ : spi_polled.h
• SPI_OP_WRITE : spi_polled.h
• STATUS_OK : status_codes.h

- u -

• UDC_AUTOATTACH : udc.h
• UDC_HAS_POWER : udc.h
• UDC_IS_ENABLED : udc.h
• UDC_IS_SUSPENDED : udc.h
• USB_DEV_FEATURE_REMOTE_WAKEUP : usb_protocol.h
• USB_DEV_FEATURE_TEST_MODE : usb_protocol.h
• USB_DEV_STATUS_SELF_POWERED : usb_protocol.h
• USB_LANGID_EN_US : usb_protocol.h
• USB_MSC_PROTOCOL_BULK : msc_protocol.h
• USB_MSC_PROTOCOL_CBI : msc_protocol.h
• USB_MSC_PROTOCOL_CBI_ALT : msc_protocol.h
• USB_MSC_REQ_BULK_RESET : msc_protocol.h
• USB_MSC_REQ_GET_MAX_LUN : msc_protocol.h
• USB_MSC_SUBCLASS_ATAPI : msc_protocol.h
• USB_MSC_SUBCLASS_QIC_157 : msc_protocol.h
• USB_MSC_SUBCLASS_RBC : msc_protocol.h
• USB_MSC_SUBCLASS_SFF_8070I : msc_protocol.h
• USB_MSC_SUBCLASS_TRANSPARENT : msc_protocol.h
• USB_MSC_SUBCLASS_UFI : msc_protocol.h
• USB_REQ_SHORT_PKT : request.h
• USB_REQTYPE_CLASS : usb_protocol.h
• USB_REQTYPE_STANDARD : usb_protocol.h
• USB_REQTYPE_VENDOR : usb_protocol.h
• USB_SPEED_FULL : usb_protocol.h
• USB_SPEED_HIGH : usb_protocol.h
• USB_SPEED_LOW : usb_protocol.h
• USB_SPEED_UNKNOWN : usb_protocol.h
• USB_STATE_ADDRESS : usb_protocol.h
• USB_STATE_ATTACHED : usb_protocol.h
• USB_STATE_CONFIGURED : usb_protocol.h
• USB_STATE_DEFAULT : usb_protocol.h
• USB_STATE_POWERED : usb_protocol.h
• USB_STATE_SUSPENDED : usb_protocol.h