LAN89530

In Production

Email this Page  Print this Page
 

 

Microchip's LAN89530 was specifically designed to provide a high performance, low-cost USB to 10/100 Ethernet connectivity solution with a Hi-Speed USB interface. The internal USB device controller is USB 2.0-compliant and implements Control, Interrupt and Bulk-in and Bulk-out USB endpoints. Microchip's UniClock™ technology simplifies the clocking scheme and reduces system BOM costs by using a single 25 MHz crystal for both USB and Ethernet connectivity - without the need for additional components when adding USB hubs.

 

Applications well-suited for the LAN89530 include a diagnostic interface for dealership service bay, a fast software download interface with an OBD connector and an in-vehicle engineering development interface, among others. The LAN89530 also supports auto-negotiation, auto-polarity correction, HP Auto-MDIX and is compliant with IEEE802.3 and 802.3u standards. An external MII provides support for an external PHY which enables HomePNA® or HomePlug® functionality. Multiple power management features are provided, including various low power modes, as well as Magic Packet, Wake-on-LAN and Link Status Change wake events. These events can be programmed to initiate a remote USB wakeup. A PCI-like PME wake is also supported when the USB host controller is disabled. Additionally, Microchip offers its complimentary and confidential LANCheck® online design review services to customers who select our products for their application design-in.*

 

* LANCheck online design review service requires an Microchip e-Services account and is subject to the terms and conditions stated on Microchip's website.


*The LANCheck online design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.
Features

        The LAN89530 is a full-featured, single-chip USB 2.0 to 10/100 Ethernet controller which incorporates essential protocol requirements for operating IEEE 802.3/802.3u standards. It is specifically designed and tested for automotive grade applications including diagnostic interface, system test interface, and fast software downloads where performance, flexibility, ease of integration and system cost control are required. The LAN89530 has an USB 2.0 Hi-Speed device controller and Hi-Speed PHY integrated.

        Applications

        • Diagnostic interface for dealership service bay
        • Fast software download interface with an On Board Diagnostic (OBD) connector
        • Gateway service interface for dealership, aftermarket and repair shop
        • In-vehicle engineering development interface
        • Vehicle manufacturing test interface for production plant assembly line
        • Legislated inspections for emissions and/or safety checks 
 Parameter Name Value
DescriptionUSB 2.0 to 10/100 Ethernet Controllers
Ethernet Bandwidth10BASE-T/100BASE-TX
MACYes
PHYYes
Interrupt PinYes
LEDs3
Op. Voltage (V)3.3
# Of Ethernet PortsEthernet x1
InterfaceUSB 2.0
Temp. Range Min. (°C)-40
Temp. Range Max. (°C)85
Downstreamm USB Ports1
NetDetachYes

Documentation & Software Back To Top

Pricing & Samples Back To Top

** Device not available to purchase online. Please contact a sales office for pricing information.

Similar Products Back To Top

RoHS Information Back To Top