CPU
     - Up to 16 MIPS performance
     - 16 x 16 Hardware Multiply, Single Cycle Execution
     - 12-bit x 16-bit Hardware Divider
     - C Compiler Optimized Instruction Set
nanoWatt Power Managed Modes
     - Run, Idle and Sleep modes
     - Multiple, Switchable Clock Modes for Optimum Performance and Power Management
     - Run mode: 1 mA/MIPS, 2.0V Typical
     - Sleep mode Current Down to 100 nA Typical
     - Standby Current with 32 kHz Oscillator:2.5 uA,2.0V typical
Flash Program Memory
     - Self-Reprogrammable under Software Control
     - 10,000 erase/write cycles
     - 20 year data retention
     - EEprom emulation capable
System
     - Internal oscillator support - 31 kHz to 8 MHz, up to 32 MHz with 4X PLL
     - On-chip LDO Voltage Regulator
     - JTAG Boundary Scan and Flash Memory Program Support
     - Fail-Safe Clock Monitor – allows safe shutdown if clock fails
     - Watchdog Timer with separate RC oscillator
Analog Features
     - 10-bit ADC, 16 channels, 500k samples per second
     - Three Analog comparators 
Universal Serial Bus Features
     - USB v2.0 On-the-Go compliant
     - Dual role capable, can act as either Host or Device
     - Low speed(1.5Mb/s) and full speed(12 Mb/s) operation in host mode
     - Full speed USB operaton in Device mode
     - Supports 32 endpoints
     - On-chip USB transceiver 
Peripherals
     - CTMU supports Capacitive Touch applications 
     - Perpheral Pin Select allows I/O remapping of many peripherals in real time
     - 4xUART Modules with LIN and IrDA support, 4 Deep FIFO
     - 3xSPI ™ Modules with 8 Deep FIFO
     - 3xI2C™ Modules with Master and Slave Modes
     - Five 16-bit Timer Modules
     - Up to 9 Input Capture and 5 Output Compare/PWM with dedicated time base
     - Hardware RTCC, Real-Time Clock Calendar with Alarms
     - PMP, Parallel Master Port, with 16 Address Lines, and 8/16-bit Data