LockedPIC 32 Starter Kit

Author
sonopaul
New Member
  • Total Posts : 4
  • Reward points : 0
  • Joined: 2008/03/12 03:34:29
  • Location: 0
  • Status: offline
2008/03/12 03:40:49 (permalink)
0

PIC 32 Starter Kit

Hello,
I can not find in the dokumentation the manufacturer and type of board connector.
Who knows it?

Greetings Sonopaul
#1

3 Replies Related Threads

    TheDude
    New Member
    • Total Posts : 11
    • Reward points : 0
    • Joined: 2008/03/06 00:50:44
    • Location: 0
    • Status: offline
    RE: PIC 32 Starter Kit 2008/03/12 04:23:57 (permalink)
    0
    If you are talking about the Pic32 Starter Kit's connector, then here's an extract from the knowledge base:
     
      
    The expansion connector on the pic32 starter kit is a hirose FX10A-120P/12-SV1.

    It's mating connector is FX10B-120S/12-SV.
    Digikey's part # for it is H11238-ND.

    We should soon be releasing a Starter Kit FAQ that addresses this and other commonly asked questions.
    http://forum.microchip.com/tm.aspx?m=293191


     
    I hope this will help,
    Theo
    #2
    sonopaul
    New Member
    • Total Posts : 4
    • Reward points : 0
    • Joined: 2008/03/12 03:34:29
    • Location: 0
    • Status: offline
    RE: PIC 32 Starter Kit 2008/03/12 04:43:20 (permalink)
    0
    Hello Theo,
    thank you for your answer.

    Sonopaul
    #3
    PIC32explorer
    Moderator
    • Total Posts : 53
    • Reward points : 0
    • Joined: 2008/03/07 11:38:31
    • Location: 0
    • Status: offline
    RE: PIC 32 Starter Kit 2008/03/12 16:29:25 (permalink)
    0
    You guys are fast!

    Just to confirm, the part number is also available on the PIC32 Starter Kit page:
    http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=1335&dDocName=en010819
    Check the "Customize" section...

    rgds

    Lucio
    #4
    Jump to:
    © 2014 APG vNext Commercial Version 4.5