Microchip Technology Inc

32-bit PIC® MCUs

The chipKIT™ Basic I/O Shield is an input/output expansion board designed for use with chipKIT microcontroller boards such as the Uno32™ and the Max32™.

The Basic I/O Shield is designed to provide a range of input/output devices suitable for beginners learning about microcontrollers and various types of I/O devices, or for use by more advanced user to provide inputs or outputs for their own projects.

The Basic I/O Shield provides simple digital input devices such as switches and buttons, and digital output devices such as discrete LEDs and high current open FET drivers. It provides more advanced devices such as an I2C EEPROM, an I2C temperature sensor, and organic LED graphic display. A potentiometer is also provided for use as an analog input device.

The Basic I/O Shield is designed to the same form factor as the Uno32 and uC32 boards, but is also usable with the Max32 board.
The chipKIT Lenny was inspired by the Arduino Leonardo, and adds additional capabilities afforded by its 32-bit microcontroller. The Lenny has 27 available I/O lines, 6 of which can be used as analog inputs. Based on the 32-bit PIC32MX270F256D microcontroller, operating at 3.3 volts and 40 MHz. Direct access to the USB peripheral controller enables the Lenny to emulate many types of USB devices; note that this functionality will be available in a future library.
The chipKIT™ Network Shield is an input/output expansion board designed for use with the chipKIT Max32™. It provides the additional circuitry and connectors to allow the advanced communications features of the PIC32MX795F512L on the Max32 to be utilized.

The Network Shield provides a 10/100 Mbps Ethernet PHY to allow connection to an Ethernet network. It provides the connectors and load switch to support use of the USB 2.0 OTG controller to implement USB device, USB host or OTG operation. It also provides two CAN transceivers and connectors to allow connection to two independent CAN networks. Connectors are provided to allow connection to two of the I2C busses supported by the Max32.

In addition to the communications features, the Network Shield also adds a 256Kbit I2C EEPROM for non-volatile data storage and a 32.768Khz oscillator to allow use of the Real Time Clock/Calendar (RTCC) peripheral in the PIC32 microcontroller.

The Network Shield is designed to the same form factor as the Max32 board.

chipKIT Pi Dev Board by element14

Part Number: TCHIP020

Mature Product
chipKIT™ Pi (Designed for Raspberry Pi) is the latest Arduino® compatible chipKIT platform from Microchip and element14. It features a 32-bit PIC32 microcontroller in a prototyping-friendly, low pin count SPDIP package. The PIC32’s performance, memory and integrated peripherals allow users to create applications including touch sensing, audio processing and advanced control. The board is supported by the free chipKIT Multi-Platform IDE (MPIDE) that can be hosted on the Raspberry Pi.

For additional information, visit element14.com/chipkit_pi

element14 is a trusted Third Party Tool provider.

Getting Started with chipKIT Pi
The chipKIT™ uC32™ (Digilent 410-254) is based on the popular Arduino® open-source hardware prototyping platform and adds the performance of the Microchip PIC32 microcontroller. The uC32 is the same form factor as the Arduino Uno board and is compatible with Arduino shields. It features a USB serial port interface for connection to the IDE and can be powered via USB or an external power supply.

This board takes advantage of the powerful PIC32MX340F512 microcontroller, which features a 32-bit MIPS processor core running at 80 MHz, 512K of Flash program memory and 32K of SRAM data memory. The board can be programmed using the Arduino IDE. It contains everything needed to start developing embedded applications. It is also fully compatible with the advanced Microchip MPLAB® X IDE and the PICKit 3™ in-system programmer/debugger. In addition, the chipKIT uC32 is easy to use and suitable for both beginners and advanced users experimenting with electronics and embedded control systems.

You will find 42 I/O pins that support a number of peripheral functions, such as UART, SPI, and I2C™ ports and pulse width modulated outputs on-board. Twelve of the I/O pins can be used as analog inputs or as digital inputs and outputs.
The Fubarino® Mini is a prototyping-friendly platform for developing Arduino compatible 32-bit applications. Compact size (5.1 cm x 1.9 cm) and low cost allow the Mini to fit almost anywhere. (It’s actually much smaller than a stick of gum!) Includes a USB bootloader that works with the chipKIT/MPIDE platform. Connect directly to your application using solder pads, or add the male expansion headers and plug into a breadboard. 
The EasyPIC Fusion v7 with PIC32MX795F512L Bundle is a highly flexible development platform targeted for those new to PIC32, but even experienced developers will enjoy the completeness of this kit. Mikroelectronika has long been recognized in the industry for creating well documented full featured development platforms for Microchip MCU’s. The EasyPIC Fusion V7 is no exception. The vivid graphics and detailed descriptions of each key circuit on the board help you to quickly understand the extensive peripheral connectivity of the PIC32. The board features a touch panel TFT display, multiple communication options, stereo audio, plenty of user configurable LED’s and two mikroBUS™ sockets that simplify adding new functionality with add-on boards. This kit when coupled with the mikroC Pro Integrated Development Environment and Compiler makes an excellent foundation for development of educational classes.
The Fubarino® SD board brings affordable, breadboard compatible high speed computing power to the Arduino-compatible chipKIT/MPIDE platform. It is able to run almost all Arduino sketches right out of the box, and includes more memory, speed, and I/O pins than a typical Arduino or clone. And it includes a microSD card slot for easy sketch access to huge file storage.
From Sensor to Cloud. The DM990101 IoT Ethernet Monitoring kit powered by Medium One (Software-as-a-Service) offers an all-in-one IoT package. To address Industrial Internet of Things (IoT) projects, the Ethernet technology becomes the most reliable and stable connectivity. This IoT kit uses an Ethernet LAN8740A and comes pre-loaded with Medium One cloud service, mobile application (from Saritasa) as well as corresponding Microchip firmware. The firmware in the kit makes use of MPLAB®Harmony, FreeRTOS™, and WolfMQTT allowing you to quick-start your IoT design. The Ethernet port is controlled by a 32-bit micro-controller that benefits from a 2MB Flash of the PIC32MZ EF providing plenty of memory space for your application code.
The security is addressed using WolfSSL features. The kit communicates with the Medium One cloud over MQTT with TLS security, using both publish and subscribe topics. The mobile app communicates with the Medium One cloud via REST over HTTPS.
The DM990101 comes with pre-configured code to support 4 sensors : pressure, temperature/humidity, air quality and motion. In addition, hundreds of other different sensors can be plugged into the MikroElektronka mikroBUS™ footprint allowing for prototyping a large variety of IoT proof-of-concepts. Sensors needs to be purchased separately on MikroElectronika.
chipKIT™ Max32™ by Digilent is an easy-to-use platform for developing advanced applications. The chipKIT platform uses a modified version of the original Arduino® IDE for compatibility with existing code examples, tutorials and resources. Pin-compatible with many Arduino shields that can operate at 3.3V.

Digilent is a trusted third-party tool provider.
The chipKIT™ MX3™ by Digilent is a microcontroller development board based on the PIC32MX320F128H MCU. It is compatible with Digilent`s line of Pmod™ peripheral modules, and is suitable for use with the MPLAB® IDE and PICkit™ programmers. The chipKIT MX3 is also compatible for use with the chipKIT platform's MPIDE development environment. The chipKIT platform with MPIDE is a PIC32-based ecosystem compatible with many existing Arduino® code examples, reference materials and other resources.

This low-priced item is not eligible for academic discount.

The chipKIT™ Pro MX4™ development board is based on the PIC32MX460F512L MCU. It is compatible with Digilent's line of Pmod™ peripheral modules and is suitable for use with the Microchip MPLAB® IDE. This board is also compatible with the chipKIT platform's MPIDE development environment. The chipKIT platform and MPIDE are part of a PIC32-based system compatible with many existing Arduino® code examples, reference materials and other resources.

Includes a built in programmer/debugger, so no additional hardware is required for use with MPLAB X IDE. The kit contains everything needed to start developing embedded applications using either the MPLAB X IDE or the MPIDE.

This low-priced item is not eligible for academic discount.

Digilent is a trusted Third-Party Tool provider.
The chipKIT™ Pro MX7™ development board is based on the PIC32MX795F512L MCU. It is compatible with Digilent's line of Pmod™ peripheral modules and is suitable for use with the Microchip MPLAB® IDE. This board is also compatible with the chipKIT™ platform's MPIDE development environment. The chipKIT platform and MPIDE are part of a PIC32-based system compatible with many existing Arduino® code examples, reference materials, and other resources.

Includes a built in programmer/debugger compatible with MPLAB. The kit contains everything needed to start developing embedded applications using either the MPLAB IDE or the MPIDE.

This low-priced item is not eligible for academic discount.

Digilent is a trusted Third-Party Tool provider.
The chipKIT™ DP32™ is the first chipKIT rapid prototype project board from Digilent. The board adds the power of the Microchip PIC32MX250F128B with a prototyping area in a single board.

The Mikromedia Board for PIC32 (MIKROE-597) fits comfortably in the palm of your hand and provides amazing multimedia capability. Based on the PIC32MX460F512L MCU, it includes a 320 x 240 TFT display with touchscreen, stereo codec, 8-Mbit serial flash, microSD card slot, headphone and microphone jacks, and a USB connector. Powered by USB, the board is capable of playing videos directly from a microSD card at 15 fps.
The amazing Mini-32 from MikroElektronika is a small development board containing a PIC32MX534F064H MCU. It operates on 3.3V power suppy, with an on-board voltage regulator that allows the board to be powered directly from a USB cable.

The Mini-32 is pin compatible with the PIC16F887 and PIC18(L)F45K20 MCUs and fits perfectly into a standard DIP40 socket. It will also fit into a standard breadboard for fast prototyping. The board is equipped with a SMD crystal oscillator, and a 32.768 KHz crystal which can be used for the internal RTCC module. It has a reset button and three signal LEDs. The Mini-32 comes pre-programmed with a fast HID bootloader, so no external programmers are required for development.

The Mini-32 is fast, versatile and inexpensive. Imagine upgrading an existing 8-bit application with 80 MHz performance and USB 2.0 On-The-Go connectivity!

MikroElektronika is a trusted Third Party Tool provider
This Protoshield kit from NKC Electronics is a great way to expand your chipKIT™ Uno32™. Develop your custom circuits on a solder-less breadboard. Once the circuit is tested and ready, install it on a Protoshield for a permanent solution, and free up your breadboard for the next project. Basic soldering experience is required. (Note: breadboard and soldering iron are not included.) 

Assembly instructions are available at http://www.chipkit.net/nkc-protoshield-uno32
Microchip’s DM182023 development kit gives embedded software developers access to a comprehensive set of open source tools for use with Exosite’s advanced cloud-based IoT PLATFORM, enabling them to fast-track their IoT initiatives.
The connectivity the Exosite IoT platform is ensured by an MRF24WG0 Wi-Fi module, agency certified IEEE 802.11 b/g Wi-Fi radio transceiver module. The MRF24WG0MA has an integrated PCB antenna, matching circuitry, and supports Wi-Fi with the free TCP/IP protocol stack. The micro-controller at the heart of this kit is a PI32MX 32-bit controller.
The Microchip WCM is the first product to be certified as ExositeReady™ which certifies that a production ready port of the ExositeReady™ Embedded SDK is available and ready for use in your application.